Box Fan Units EOLA CCV – Three phase

Fans of the EOLA CCV series are designed for Conveyed clean air or slightly dusty, not abrasive.

Min. / Max. Air temperature: -20°C / +50°C


In standard version framework is constructed in aluminum alloy extruded sections, coupling by 3-way joints in glass filled nylon or aluminum, while panels are of single skin type in pre-coated galvanized steel (RAL 9002) filled with thick acoustic material that allow a remarkable noise reduction.

Double width double inlet (DWDI) centrifugal fan with forward curved blades, driven by trapezoidal belts and adjustable pulleys. Fan and motor supported by single base frame and isolated from the main structure by anti-vibration mounts and flexible joint on the outlet.

Asynchronous three-phase motors according to international standards IEC 60034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE, CE marked, IP 55, class F. Suitable for S1 service (continuous working at constant load).


  • Double skin panels (thickness 25mm or 45mm), insulation in polyurethane foam with high density or stone wool.
  • Double speed motor (4/6 poles)


Sizes from 1.000m³/h to 30.000m³/h


  • Inverter IP66 OPTIDRIVE (Only for single speed motor)
  • Electrical panels (ask for the options)
  • Protection Roof for external installation
  • Filter housing + filter cell(s). G4 (EN779)
  • Supporting feet in aluminum (H100mm)
  • Manual Damper for air flow setting
  • Exhaust Cowl with net
  • Other on request


  • Frame in stainless steel (AISI 304 or AISI 316L)
  • Paneling in stainless steel (AISI 304 or 316L)
  • Paneling in aluminum
  • Maximum fluid temperature up to +80°C
  • ATEX (3G) according to Directive 2014/34/UE.
  • Other


Offices, Restaurant, Technical Room, Shops, etc.


  • Directive 2006/42/EC (EU Machinery Directive)
  • Directive 2014/35/EU (Low Voltage Directive)
  • Directive 2014/30/EU (EMC Directive)